Fix and stabilize worn wood joints
Since wood is often susceptible to air temperature and humidity, the joints on wood pieces can shrink and become loose. Normal wear on wood joints also accounts for their instability. The repair for a joint is fortunately rather simple and can be accomplished by just about anyone. Armed with the correct tools, you can quickly and effectively fix troublesome joints and extend the life of your wooden piece.
Instructions
1. Remove the wood joint. Disconnect the wood joint to gain easy access to the dowel.
2. Clean the wood glue. Take a putty knife and scrape away the dried wood glue on the dowel and joint.
3. Apply a thick bead of wood glue to the dowel and the connection point.
4. Wrap the dowel with cotton thread. Take one end of the cotton thread and wrap it around the dowel starting from the top and working it down to the base. Cut the cotton thread once you have reached the base of the dowel.
5. Apply a second layer of wood glue on top of the cotton thread.
6. Connect the wood joint. Firmly connect the newly prepared dowel to the joint.
7. Clamp the joint. Firmly apply an appropriately sized clamp to the joint to keep constant pressure. Allow the joint to set for 24 hours and remove the clamp.
Related Posts:
Stabilize A Wobbly Bed Frame
Stabilize a Wobbly Bed FrameA wobbly bed frame makes it difficult to sleep and creates a potential safety hazard. The wobbling may result from loose bolts or separating joints that, when pulled co...
Make A Wood Valance
A wooden valance, or cornice board adds a finished touch to any room in a home. It provides elegance by covering the tops of window frames, hiding blinds and curtain rods. Curtains seem suspended...
Install Wood Valence Kitchen Cabinets
Valances add visual interest.Installing a valance between your cabinets will increase the decor of your kitchen. A wood valance usually is installed over a window and between two cabinets. And the...
