The Kenwood TR-7730 2 Meter FM Radio is a small FM transceiver that you can install in your vehicle to allow you to communicate with other vehicles on the road. By installing this in your car and tuning in to other frequencies, you can listen in to communications and broadcast your own station to others with ease. This radio system also allows the user to program up to five of her favorite frequencies into the internal memory of the device.
Instructions
1. Turn the Kenwood radio on by flipping the "Power" switch. Once the device is on, use the "Tuning" dial in the center of the radio to bring in a frequency you want to save. The frequency you are currently listening to will be displayed on the screen of the device. When this is correct you will heard the broadcast through the speakers of the device.
2. Set the "Main Ch" switch to the channel that you want to save this frequency to. You can choose 1 through 5. When this switch is in the correct position, press the "M" button located to the right of the "Main Ch" switch. You will hear a beep on the device confirming that the frequency was saved to this channel. Repeat Steps 1-2 for each frequency you want to save.
3. Set the "Main Ch" switch to the channel that you want to recall. When this dial is in the correct position, press the "MR," or memory recall, button to bring up the frequency that is saved to this channel.
4. Press the "Scan" button at any time to begin automatically scanning through your saved channels. The radio will stop on a channel when it picks up a broadcast on one of the frequencies.
Tags: Main switch, want save, When this, bring frequency, channel that, channel that want