The Sony KP-51WS510 is a rear projection television that uses individual lamps for each of the three colors. In order to get the best picture, all the lamps must be perfectly aligned. Otherwise, the image may look blurry or show color anomalies. You can adjust the convergence automatically using the Flash Focus feature. If the picture still has problems after performing Flash Focus, you also can adjust the convergence through the menus using the remote control.
Instructions
1. Turn the TV on and switch to a television signal.
2. Press the "FLASH FOCUS" button on the front panel of the TV. A cross pattern will appear on the screen. When the cross turns white, automatic convergence adjustment is completed.
3. Press the "MENU" key on the remote control.
4. Scroll to "Setup" using the joystick on the remote and press the "+" key.
5. Scroll to "Convergence" and press "+" again. A 9-by-7 grid of crosses will appear on the screen. The center cross has a yellow square bracket around it. You can adjust the convergence manually by looking at each of the crosses. Crosses that have red or blue edges need adjusting, white crosses do not.
6. Move the yellow bracket to a cross that needs adjusting using the joystick. Start with the crosses in the center and move toward the edges. Press the "+" button and the bracket will change to red. Move the joystick until the cross turns white.
7. Press the "+" key to confirm the adjustment and move to the next cross.
8. Repeat Steps Six and Seven until all the crosses are white.
9. Press the "MENU" key to exit the convergence screen.
Tags: adjust convergence, appear screen, cross turns, cross turns white, Flash Focus, Press MENU