Installing a keyless entry to an Acura is not as complicated as it may seem. The entire process is done without any tools, but by opening the car doors, inserting the key, turning the car on and off and pressing buttons on the keyless entry remote. The only thing you need to know when programming a new keyless entry remote to your Acura is the order in which to do things, according to the website webuyremotes.com.
Instructions
1. Put the key into the ignition and turn the car on.
2. Press either the "Lock" or "Unlock" button on the remote. Within 4 seconds, turn the ignition to the "Lock" position. Within the next 4 seconds, turn the ignition "On." Repeat this step two more times.
3. Press either the "Lock" or "Unlock" button on the remote within four seconds of completing Step 2. The locks on the power door lock and unlock to confirm you are in the programing mode.
4. Press either the "Lock" or Unlock button on the remote within 10 seconds of entering the programing mode. If you have more remotes to program, you must do so by pressing either the "Lock" or "Unlock" button on all the remote controls you want to program to the car. The car doors lock and unlock after each remote has been programed. Turn the ignition switch to "Lock" to exit the programing mode.
Tags: button remote, either Lock, either Lock Unlock, Lock Unlock, Lock Unlock button, Unlock button