Wednesday, January 6, 2010

Build A Radio Kit

Radio kits contain all the parts to build your own radio, though antenna and headphones usually are extra. You can build a simple crystal radio made with solderless connectors, a complex dual conversion shortwave ham receiver, a specialized satellite or weather radio, or a multifunctional AM/FM clock/alarm/start-the-coffee radio robot. Some radio-builders' first project is one built from scratch for a Boy Scout merit badge, using homemade parts (see BizarreLabs.com resource below). Most kits have schematic diagrams along with step-by-step building instructions. You can learn the electronics of what happens to an incoming radio signal to make it audible. It is a great thrill to make something that works--even if it doesn't work the first time (and they never do). You debug it and you tinker with it when it does work you smile and think make it better to push it to its limits.


Instructions


Preparation, Assembly, Testing


1. Read the instructions and gather tools on a clear workbench.


2. Check off the parts in the kit against parts list. Become familiar with the nomenclature and align them by category, i.e. capacitors with capacitors, resisters with resisters, etc.


3. Follow step-by-step instructions, mounting larger components and connecting them, checking that a solid connection was made. Cross-check against the schematic. See if it agrees; if not, trust the schematic.


4. When done make sure you do not have any parts left over. Sometimes kits may accidentally contain extra parts. If you use a yellow marker pen on your schematic as you go, you can check at a glance to see if you missed a step and go back and do it.


5. Now connect your antenna, and ground (if required) and connect your headphones. Insert the battery and turn on the radio. (A crystal set has no battery or your radio may be solar- or moon-powered.)


Any problems? Check your wiring again and make sure all connections are solid. Failing this, borrow a signal generator and troubleshoot to make sure all components are functioning.

Tags: make sure, connect your, your radio