Wednesday, May 30, 2012

Instructions To Connect The Motorola H700 To A Sanyo M1

The Motorola H700 is a hands-free Bluetooth headset that can work with Bluetooth-enabled mobile phones. The Sanyo M1 is a mobile flip phone released on the Sprint network. Bluetooth compatibility is among its many features. Connecting the H700 to the M1 is easy. After following just a few steps, you will be able to make and receive calls using the H700.


Place H700 in Pairing Mode


As with all Bluetooth headsets, the H700 needs to be paired with the device before it can be used, which is done in pairing mode. In pairing mode, the H700 makes a transmission so that Bluetooth-enabled devices can pick up the device and connect to the headset. Once connected, no other device can connect with the Bluetooth headset. To enter pairing mode on the H700, open the headset boom located near the microphone. After a few seconds the indicator light will turn purple. Once purple, the H700 is in pairing mode.


Searching for the Device With the M1








Once the H700 is in pairing mode, have the M1 search for Bluetooth devices. To do this, press "MENU/OK" and choose "Tools," "Bluetooth," "Add New" and "Search." A list of Bluetooth devices will show up on the screen. Highlight "Motorola H700" and press "MENU/OK." Choose "Add to Trusted," enter "0000" and press "MENU/OK." The devices are now connected and ready to be tested.


Testing the Devices








Once the devices are connected, test that both the phone and the headset are working properly together. First, place the headset in your ear. Dial a number on the phone and press "Send." If you can hear ringing, the devices are connected properly and ready for use.


If the connection was not successful, repeat the previous steps and try again. Make sure the indicator light is glowing purple and is steady. If you have connected the headset to a previous device, make sure that device is turned off so as not to interfere with the connection procedure. Once the other device is off, close and reopen the boom to enter pairing mode.

Tags: pairing mode, devices connected, Motorola H700, press MENU, Bluetooth devices, Bluetooth headset, device connect