Connect the 3Com HomeConnect USB camera to your computer through its USB cable.
The 3Com HomeConnect PC Digital WebCam is a Windows-compatible computer camera capable of taking still shots and capturing video. Provided your Windows-based PC has a USB port and CD-ROM drive, you can install the 3Com HomeConnect USB camera in a matter of minutes. The camera's installation CD works automatically, relieving you of the responsibility of even navigating a setup wizard. Load the 3Com HomeConnect USB camera's Connections CD into your CD-ROM drive to get started.
Instructions
1. Insert the 3Com HomeConnect USB camera's Connections CD into your computer's CD-ROM drive. Connections' pre-installation diagnostic utility loads automatically upon insertion. Run "begin.exe" located on the Connections CD from Windows Explorer or the Start Menu "Run" application if it does not load automatically upon insertion for some reason.
2. Click "OK" when the Connections Install Assistant loads on your desktop.
3. Click "OK" to shut down your computer after the Connections diagnostic check completes. Be sure to leave the Connections CD in your CD-ROM drive.
4. Connect the 3Com HomeConnect USB camera to your computer. Insert the small end of the 3Com HomeConnect USB camera's USB cable into the device's USB port. Insert the other end of the cable into an available USB port on your computer.
5. Restart your computer. The Connections CD will install all necessary drivers once Windows loads completely.
6. Wait for the post-installation utility to launch. The utility will display your camera's video recording and ask if it is visible in the utility's window. Click "Yes" if you see the video content. Doing so completes the 3Com HomeConnect USB camera's installation.
Tags: 3Com HomeConnect, HomeConnect camera, your computer, 3Com HomeConnect camera, CD-ROM drive, 3Com HomeConnect camera, automatically upon