Motion detector security lights can be used in a variety of ways, including in garages or basements for automatic lighting, outside for security lighting to help deter burglars or even for scaring away wild animals. Choosing the best location and type of light depends on its intended use, since not all security lighting is used exclusively for security purposes.
Indoor Lighting
If you are mounting motion-sensing security lights indoors, think about where you want to put them before making your purchase. For example, if you want to light a corridor in an office building, you should purchase one light that has a deep motion sensing field and place it high on the ceiling at one end of the hallway, angled down slightly so that you can cover as much ground as possible. Depending on the type of room, two lights opposite each other will provide the best coverage. If you want to use a motion-sensing security light for normal lighting, in areas such as basements where there isn't much foot traffic, get a light with a low light output and long battery life, and place it directly above the entrance to the room. When placing motion-sensing security lights into rooms that are frequently used, a wall-mounted switch that controls the flow of electricity to the lights can be extremely beneficial, since you can turn them off during the day when people are moving about, and turn them on at night when people are not present. It does present a security risk, so placing the switch in a hidden location would be wise.
Outdoor Lighting
In outdoor motion detector security lighting, weather is the primary concern, followed closely by the brightness of the lights. Since outdoor motion detector security lights will be exposed to the elements, the chosen light should have a tough external casing that can withstand heat, cold, rain and snow, depending on your geographic location. You should place the light in a location where it is partially protected from the elements, such as under the eaves of your roof, or under a porch overhang. Rust-proof screws or nails should be used to mount the security light, and if you are worried about theft of the light, mount it 10 to 12 feet high, and secure it with heavy-duty screws. If you have a large area that you want covered, purchase multiple lights and arrange them so their sensors cover separate areas that each overlap by a few feet.
Tags: security lights, detector security, motion-sensing security, security lighting, detector security lights